Level 5 - Advanced

A equipe mXrap frequentemente solicitará que você execute um "backup padrão" ao fornecer suporte ou ao adicionar novos aplicativos. Isso nos permite trabalhar na sua raiz no mesmo estado em que você a está usando, para que qualquer configuração ou personalização seja visível para nós. É uma boa prática fazer backups padrão regularmente, pois facilita a identificação ou reversão de qualquer alteração que cause problemas. Recomendamos que um único dispositivo seja usado para gerenciar a pasta raiz no mXsync para evitar confusão. Este dispositivo deve estar conectado ao mXsync e seria responsável por concluir todos os backups e aplicar patches.

Você sabia que pode baixar pastas root do mXsync? Carregamos uma pasta root para a mina "Unicorn Gold", que é semi-fictícia e usa conjuntos de dados disponibilizados para pesquisa de sites que fecharam. Os dados podem ser úteis para treinamento, demonstrações, projetos de pesquisa ou apenas por curiosidade. Você pode até querer baixar a root do Xgames... para fins de trabalho, é claro.

Level 6 - Advanced

The Design window allows to import the design survey and configurate the octree data structure, the stope faces and different parameters. This will get exported at the end to the stope database which can be used for the reconciliation and queried in the analysis app. Cycle through each Design step to understand how it works.

The excavation hazard is calculated on minodes that represent underground tunnels as a series of connected nodes. For more information on minodes and to find out how to create or update them, go to this page: Minode Generator

Export data and visualisations from mXrap to various formats and files

Purpose

Discover how to create complex filter setups for specific analysis tasks

You can pick any grid cell to view the frequency magnitude chart of events found in the local area. This is the b-value used for this grid point. The b-value is a very sensitive parameter in hazard calculations, and there are cases where the automatic FM modelling algorithm may not work well. There are several markers to help identify potential areas where the FM model may not represent the data accurately:

If you pick a minode in the 3D View, the grid point sources that contribute to the hazard at that minode will be plotted, scaled by how much they contribute. Theoretically, every grid point contributes to the hazard at a minode, but there is an accuracy threshold applied with a minimum probability to speed up the calculations. Increasing the accuracy will result in more contributing grid point sources.

Configure spatial grids for seismic analysis and visualisation in mXrap

Overview

Probabilistic seismic hazard evaluation based on grid and spatial methods.

The hazard assessment app is designed to be simple to use but beneath the interface is a lot of complexity. It is important to be familiar with the underlying calculations and ensure that you are aware of the assumptions and limitations of the analysis. The calculations have been described in the linked pages below.

There are three types of isosurfaces that can be plotted in the Hazard Isosurfaces window. The details behind the calculation of each parameter is linked in the pages below:

Grid Definition

This window shows the stope database that exist in the app as well as the different steps completed for the stope (design, blast, CMS). In the panel, you have the option of the deleting a stope from the database if needed.

Level 1 - Beginner

Create, update, delete and rename levels in Damage Mapping application

Level 2 - Beginner

Level 4 - Intermediate

Aplicando um Patch

Why can't I see this event in mXrap?

Purpose

Level 3 - Beginner

Purpose

The stope reconciliation process pulls in data from various sources to calculate the stope performance and potential root cause parameters. Here is listed the required data that can be imported into the app based on their purpose:

The Wizard app is used for creating your stope database. It is divided into three main sections: Stope Design, Blasting and Reconciliation, following a stope design and planning sequence. This allows to import and analyse the data as it becomes available. Follow the links in the Key learning process section for the documentation on each window.

You can now plot the relationship in a couple of different ways:

Switch between file formats, export decimated surveys for reduced file sizes, export surveys with translated or swapped coordinates, and combine multiple surveys into a single output file.

Hazard can be tracked over time by specifying a number of time steps and a step interval. The back analysis tool will step the backdate backward through time and summarise the hazard within each mining volume. Mining volumes can be defined in the Configuration area (link to filter volume editing page). The hazard within each mining volume is calculated by accumulating the hazard within each grid cell or for each minode within the volume.

Automatically create and manage inspection tracks in Damage Mapping application

Save and restore complete analysis environments with filters, views, and configurations